- Home
- Machines
- New Machines
-
ME-509
ME-509
Edgebander
ME-509 Edgebander
The Masterwood ME 509 Edgebander is built for performance, delivering smooth, accurate edging with minimal operator input. Designed for fast, efficient production, it ensures a high-quality finish while maintaining reliability and ease of use.
Key Information about the ME-509
Machine Specifications
Machine Dimension |
6734 x 830 x 1730 mm |
Working Speed |
15-23 m / min |
Minimum Panel Size |
120 x 90 mm |
Panel Thickness |
10 - 60 mm |
Edge Thickness |
0,4 - 3 mm |
Delivery time |
UK Stock for immediate delivery |
What's Included
Release Agent Spray
The machine has a nebulisation group at the entrance of the panel to spray a special liquid on the top and bottom edge of the panel, preparing the materials for gluing.
Pre Milling
The rectifier allows the machine to perfectly square and finish the panel incase of chips or not straight surfaces
Pre Heating Lamp
The preheat lamp helps the panel to warm up when ambient temperatures are low, it also removes humidity from the panel. This is essential for an excellent sealing of the glue on the panel and on the edge to be glued.
Pressure Rollers
The 5 pressure rollers attach the edge to the panel, The first roller is motorized and the following rollers are idle with different inclinations. The positioning of the rollers is controlled by a pneumatic position.
End Cutting
The two headers trim the excess edge in front of and behind the panel. The cutting units move precisely on two prismatic linear guides equipped with automatic lubrication.
Fine Trim
The top and bottom edge trimming unit removes excess edge to help subsequent units achieve an excellent edge finish. The group is equipped with two pneumatic positionings.
Corner Rounding
The rounder unit works with two separate motors which round the upper & lower edges of the panel. The movement of the arms is pneumatic, the structure is very robust to prevent vibration.
Edge Scraping
The edge scraper unit rounds the edge according to the required radius, works with two large copiers which allow the unit to work at high speeds. The group is equipped with two pneumatic positionings
Glue Scraping
The glue scraper unit is essential for removing any glue residues from the panel surface. Thanks to these copiers, it can also work with panels that hinge holes.
Clean Agent Spray
A special device to spray a cleaning agent on the top and bottom edge of the panel is installed. This device is placed before the brushes and optimally prepares the panels for the cotton brushes.
Buffing
The buffing unit is a device with two rotating brushes for cleaning the applied edges
Release Agent Spray
The machine has a nebulisation group at the entrance of the panel to spray a special liquid on the top and bottom edge of the panel, preparing the materials for gluing.
Pre Milling
The rectifier allows the machine to perfectly square and finish the panel incase of chips or not straight surfaces
Pre Heating Lamp
The preheat lamp helps the panel to warm up when ambient temperatures are low, it also removes humidity from the panel. This is essential for an excellent sealing of the glue on the panel and on the edge to be glued.
Pressure Rollers
The 5 pressure rollers attach the edge to the panel, The first roller is motorized and the following rollers are idle with different inclinations. The positioning of the rollers is controlled by a pneumatic position.
End Cutting
The two headers trim the excess edge in front of and behind the panel. The cutting units move precisely on two prismatic linear guides equipped with automatic lubrication.
Fine Trim
The top and bottom edge trimming unit removes excess edge to help subsequent units achieve an excellent edge finish. The group is equipped with two pneumatic positionings.
Corner Rounding
The rounder unit works with two separate motors which round the upper & lower edges of the panel. The movement of the arms is pneumatic, the structure is very robust to prevent vibration.
Edge Scraping
The edge scraper unit rounds the edge according to the required radius, works with two large copiers which allow the unit to work at high speeds. The group is equipped with two pneumatic positionings
Glue Scraping
The glue scraper unit is essential for removing any glue residues from the panel surface. Thanks to these copiers, it can also work with panels that hinge holes.
Clean Agent Spray
A special device to spray a cleaning agent on the top and bottom edge of the panel is installed. This device is placed before the brushes and optimally prepares the panels for the cotton brushes.
Buffing
The buffing unit is a device with two rotating brushes for cleaning the applied edges
Gallery
Finance Available
Finance Available on All Machines
Finance is available on all our machinery, subject to status. Spread the cost with varying monthly payment options to allow you to have flexibility on paying for your new asset. Please get in touch to speak to a representative.
Get in touch to enquire about purchasing the ME-509 Edgebander.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Phasellus quis mollis nisl. Phasellus porta ipsum egestas est consectetur, sed facilisis nisi fringilla. Curabitur viverra aliquam pharetra.